How can I resolve some of the main causes of tail bounce on spinning machines?
The tail top of the spinning machine tool is easy to hit. The main reasons for machine tool tailtops and their corresponding solutions are:
1. The machine tool is not operated correctly, the cutter wheel hits the tail jack shaft, and the tail jack shaft is deformed.
2. The tail top and tail top shaft are not accurate enough.
3. The tail shaft bearing is worn or damaged, and abnormal noise is generated when the tail shaft rotates.
4. The assembly accuracy of the spindle mold and flange is poor, and the tail top jumps.
How does the tail top jump of a spinning machine affect spinning forming products?
Spinning machine tail jumps have a certain effect on spinning molding, mainly due to the following factors:
1. Stainless steel has poor material elongation and high stress, so if the tail jumps, the material will be subjected to non-uniform stress and the root will be damaged.
2. Aluminum material has low hardness, and the tail jump in the spinning process will scratch the bottom of the spun product.
3. When the tail top jumps, the contact area between the material and the tail top is insufficient, and the material moves due to the rotational force.
4. Tail top jump affects the dimensional accuracy of the product after molding, and the diameter accuracy of the bottom of the product deteriorates.
Third, the main reason why the spindle of the spinning machine gets stuck in the process of large-scale strong spinning
1. The rotating mold has not lost weight and the quality of the mold is too high.
2. The spindle motor belt will loosen after a long period of use. Just adjust the tightening force in advance.
